Copyright © 2000. MOSFI SOFTWARE.
Documents
About Knots
Ontario Warranty
Yonex Warranty
Racket VS Racquet
Knot Tying
Four Knot (4) Versus Two (2) Knot Stringing:
There have been many different opinions on the subject. For every
knot that is tied, there is some tension loss. This would lead to
the conclusion that two (2) knot is better than four (4) knot.
However, the longer the string, the more it stretched, which would
lead to the conclusion that one (1) long piece would stretch more
than two (2) shorter pieces. So, does the stretch of the longer
string loose more tension than the loss of tying four knots, two
(2) shorter pieces of string!
Four Knot
For Four (4) knot stringing, a packet of strings needs to be
cut into two (2) separate pieces where one string is longer and
the other shorter. Mains requires slightly longer string than
the Crosses.
Open the Packet of strings and find the center. Take additional, approximately two (2) feet to the long side (Mains) and cut the string. The remaining shorter side will be used to string the Crosses.
Start Mains first. Feed the string through the bottom hole on the Left side of the racket handle and up to the left-of-center hole at the top. Over to the Right of center hole at the top and down to the right side of racket handle at the bottom. Even out the string on both sides of the racket by finding both ends of the string and pulling the entire length of string together.
Two Knot
For Two (2) knot stringing, do NOT cut the string. Feed the
string through the bottom hole on the Left side of the racket
handle and up to the left-of-center hole at the top. Over to
the right-of-center hole at the top and down to the right side
of racket handle on the bottom. Pull six and a half (6 1/2)
time the length of the racket handle on the right side of the
racket. This will become the Mains side while the rest of the
remaining string, on the left of the racket handle will be used
for the Crosses.
Exceptions
If a player needs two different tensions, one
for Mains and a different tension for Crosses, then that situation
can only be solved by four (4) knots. i.e. two sepatate strings!
Stringing a racket for dual tensions with one (1) string, two (2)
knots, will NOT work as the tension on the single string will
even out relatively quickly with playing.
Document Index
Ontario Warranty
A badminton stringing job typically carries a workmanship warranty of 7 days, although this can vary by shop. This warranty generally covers defects in the stringing process itself, such as incorrect tension or improper knot tying, rather than the breakage of the string itself, which is considered wear and tear.
Document Index
Yonex Warranty
Yonex requires 4 Knot and Rackets not to exceed 26lbs, for warranty on all their rackets!
Document Index
Racket VS Racquet
Both "racket" and "racquet" are correct spellings for the sports equipment used in tennis, badminton, and squash. In North America, racket is the most common and standard spelling. Racquet is an older, French-influenced variation typically used in British English and occasionally by specific brands or country clubs.
Breaking Down the Differences
Industry & Regional Preferences
Which one should you use?
You can safely use either spelling, as they are completely interchangeable. However, racket is the most widely accepted and searched term, making it your best bet for general use.
Document Index